@Nuno

Devlog +: Fixes
After printing one part i realised the brass inserts didnt fit and the bottom was too thin so I fixed that

Devlog: More Cutting
Basically just gutted the last segment so now everything weights less than 500 grams
i still need to redo the base and figure a way to nop snap the cables as they go from the claw to the base

Devlog +: Update the Bells.
After submitting the design it got rejected because it was hard to print so i decided to do a sort of sliding connection for the Bells so they can be separately printed so if u want them a different collor u dont need AMS (Mine are still gonna be all white cuz i only ordered white filament).

Devlog 4: Black and More
Basically i started to strip everything in order to make it extremely light.
Also made it Black cuz it looks better.
And added support for Brass Inserts.

Devlog 3: Confusion
Basically this hour was just me figuring out ways to route the cables in order for them not to tangle.
So now im trying to mkake a design similar to a construction crane where it is mostly hollow so i have space to pass the clabes through the middle.
its still kinda ugly ngl but i still have time

DevLog +: BUGGGGS
Fixed Half a Night of sleep of bugs
Conclusion: DONT WORK WHILE NOT BEING ABLE TO ALMOST READ THE CODE.
Idk what pic to add so a pic of the devlog as the devlog pic is funny

DevLog 2: More Segments More Servos
Basically Just did a bit more work, aka another segment and the claw!
Lowk been having a lot of fun figuring out how im gonna wire all of this but overall its been fun!
Now im working on making the design lighter and trying to make more compact

Devlog 1: Arm
Basically instead of being normal and finishing my WebOS, I decided to Start yet another Hardware project because they are funnier!
Basically I wanna build some sort of Claw Arm with Servo Motor cuz on paper it looks cool!
So i spent some time doing some sketches and CADing the general parts of the arm.
I wanna also try using an ESP32 and the ESP NOW protocol to control with an ESP based controller!
But for now i still need to finish and polish the CAD model

DevLog 4: GitHub Repo
Basically i Just finished the BOM and all kinds of things to publish the repo.
Also reached the conclusion that i cant afford this hobby without Stardance cuz wdym a simple alarm is 45 bucks and the goddamn screen alone is 10!
Like i hate living in Europe and being overcharged for foreign products

Devlog 5: GitHub and repo Done
Basically polished up some clearances on the Cad since had forgot and did the repo: AKA copy paste my old hackpad and edit to the new stuff.
Well thats it. thnaks if u are reading this

Devlog 4: Firmware
Just figured out out a keyboard matrix code works and just make the qmk firmware.
lowk i dont have much more to say it was basically copy paste of my old macropad with some tweaks.

Devlog 3: From Light Pad to Hollow Pad
After some time polishing the CAD i finally got a worthy design to be called an “upgrade”.
Of course I added some Hollow Knight Designs including The Knight, and his Nail and The Best Tool in Silksong the Claw Mirror.
Also added a stand so it can be tilted!

Devlog 2: CADing and Stuff
Im still working on polishing the Case a bit up but lookout decided that sometimes spiking to 2gigs of ram usage is funny so I need to restart my pc and keep working!
THESE 8 GIGS OF RAM LOWK KILLING ME

DevLog 1: HackPad Redo
I decided that after some time of learning everything from CAD to Code i wanted to redo my first project.
This time i wanted to try a 3x3 keyboard matrix, using a rotary enconder and still use the oled

DevLog: Bug Fix

Just fixed some bugs since i needed to shut down the pc and Hackatime saved like 20 minutes

DevLog 3+: MORE BACKGROUND

Basically I got lost in the sauce and decided i wanted to do more backgrounds.
So I polished the Space One and Created a Nether and Glacier One
Thats all prob gonna do the Repo Before doing any more background

DevLog 3: Code and Drawings

Made the code for the alarm and some Background for it;
Might do 1 or 2 more

DevLog 2: Case

Realised yet again i suck at 3D Modeling so instead of drawing a the Knights head as the Body I hid little drawings inside and outside the Clock Body.
Well.. thats it.

DevLog 1: PCB YIPEEEE

i tried making a simple and compact design since i wanna make the 3d print modular (when i make the case ill elaborate) so i made basically everything go under the screen besides the switches also
HOLLLLOWWW KNIGHT AND HACKCLUB SILKSCREEN!!!!
Besides that thats pretty much it.

Devlog: Its Done
Basically just committed the files the files to GitHub
Now I am just polishing up to Submit it for FUNDING!!!