By
@Nuno
After a few weeks of Learning CAD, PCB design etc, i decided to redo my first Project.. My HackPad. Lowk also wanted to decor a hackpad with hollow knight stuff
@Nuno
on
Hollow Pad
51m logged
Devlog 5: GitHub and repo Done
Basically polished up some clearances on the Cad since had forgot and did the repo: AKA copy paste my old hackpad and edit to the new stuff.
Well thats it. thnaks if u are reading this
@Nuno
on
Hollow Pad
1h 24m logged
Devlog 4: Firmware
Just figured out out a keyboard matrix code works and just make the qmk firmware.
lowk i dont have much more to say it was basically copy paste of my old macropad with some tweaks.
@Nuno
on
Hollow Pad
1h 36m logged
Devlog 3: From Light Pad to Hollow Pad
After some time polishing the CAD i finally got a worthy design to be called an “upgrade”.
Of course I added some Hollow Knight Designs including The Knight, and his Nail and The Best Tool in Silksong the Claw Mirror.
Also added a stand so it can be tilted!
@Nuno
on
Hollow Pad
2h 28m 57s logged
Devlog 2: CADing and Stuff
Im still working on polishing the Case a bit up but lookout decided that sometimes spiking to 2gigs of ram usage is funny so I need to restart my pc and keep working!
THESE 8 GIGS OF RAM LOWK KILLING ME
@Nuno
on
Hollow Pad
1h 46m logged
DevLog 1: HackPad Redo
I decided that after some time of learning everything from CAD to Code i wanted to redo my first project.
This time i wanted to try a 3x3 keyboard matrix, using a rotary enconder and still use the oled
