WePod
Hardware
By
@Nuno
- 3 Devlogs
- 7 Total hours
WePod is an Open source MP3 player made for Everyone
Devlog +: Fixes
After printing one part i realised the brass inserts didnt fit and the bottom was too thin so I fixed that
DevLog 2: WePod- Orange
Finished the Case for the WePod. Ended up going for an Orange and Yellow look with a spot to place a keychain similar to a phone case.
I made it so it splits into 2 pieces that connect via 3M screws. The only ports exposed are the Charging Port, the SD Slot and 3.5mm Jack so if u ever want to change the firmware u are gonna need to take it apart
DevLog 1: WePod, An open source Mp3 Player.
I was way too young to know what an IPod was until i began to like eletronics. I also never had an Mp3 player so with that and the fact we dont anything now i decided to create the WePod.
Its a simple Mp3 that runs on the Xiao RP2040 and uses a SD Card as its memory to hold our very legitimate and totally not pirated songs.
Right now I have only made the pcb without the BMS but i left 3 pads on the right to eventually connect a BMS
