after getting ll the components i program the board and then started prototyping it on a bread board but after many attemts it finally started working and now i am fixing some issue on pcb in kicad
yesterday I faced some such lightning strikes so from this I decided to build a detector that can detect lightning strikes so after finding proper parts for this project I started drawing the SCH and after that I designed the PCB and also write the code which take me some time but I done that and at the end I made the repo and create the BOM and add al the parts include buy links and after all this I am ready to upload this project to get funding
on my prvious submit was rejected for not properly explain the wire connections so i properly explained it today in the readme
i found that some children or anyone not safe to went out so i decided to make a project which felt them safer so i made this at first i watch some YouTube tutorials then i go with some my opinion parts and i started drawing the sch after that i design the pcb and after working on the hardware I started writing code for this project . later i write the github repo i started with the bom and then i write the readme and at last upload all other requard file in it now i am finished and rady to ship it.
after finding that my desk has no variable power supply i started thinking to build this project at first i also watch some tutorials then chose the parts for building this project later i started building the case for this project which took most of my time after done this i started working on my repo i create the bom write README and add all other essential files and after checking everything i am ready to sent this project for review
it a really simple project so i started to draw the sch which took me about 10 mins and then i done the pcb work i also add some graphics on the pcb board later the repo took me a little long than any other work i write the bom and readme add al pcb files . finally i done everything
hey yesterday I write the code and it took me about a hour but sadly at last moment the electricity gone and although the code saved but the recording not . so my another hour waisted and today I upload the code to GitHub and some other stuff in repo.
on today i mainly work on my GitHub repo i write the readme and upload all required photos and i also write the bom and give all purchase link later i upload the Gerber file and all other essential files
today i think to build some crazy and decided about to make a esp 32 jammer which can jam Bluetooth and wifi signals at first i watch some tutorials on youtube and then draw the sch later i design the pcb and then add some images .I also create the repo n github
