I made a little project which is help to prevent thief broke into houses like the door locks are ma de with metals and I create this project with transistor and touch module so basically when someone touch the metal lock he grounded the circuit and completed it and alarm turn on it also has a reset button to turn the alarm off it powered with a 3.7v 18650 lithium ion battery.
Great work with this! The only thing is, make sure that you upload the Gerber files later on!
on my prvious submit was rejected for not properly explain the wire connections so i properly explained it today in the readme
hi there! this proejct is really cool but its unclear where the touch pin actually is on this! I see a button and i see some headers but i dont see anywhere for a touch sensor. Maybe point it out?
i would also go through the README section on this page! https://codex.hackclub.com/other/returns
it a really simple project so i started to draw the sch which took me about 10 mins and then i done the pcb work i also add some graphics on the pcb board later the repo took me a little long than any other work i write the bom and readme add al pcb files . finally i done everything
