By
@EndLess9
This project is a 3D design of a Blue among us character that I made on OnShape. My design is unique as unlike most designs of among us characters this one is completely flat at the bottom so it can be placed on your desk like it's sitting there.
Successfully printed it. I had to improvise a little thought by painting the eyes since I only had blue filament. I also had alot of trouble with this project but I’m glad I overcame it.
28m 51s logged
Devlog #3:
Previously the little guy have a pretty solid cylindrical shape and it looked fine, but I wanted to try something different…I used the conic tool and made it’s body wider right above the base. This makes it’s body look more dynamic. Although this was a very simple change it took be about 30 minutes of trial and error before I got it right.
Also…
This will likely be the last devlog for this project since all the modeling is basically done, all that’s left is to print it.
53m 42s logged
Body and Legs:
I scrapped my old technique. I adopted a new one where i create a normal rectangle and then I create a semi-circle on the top and bottom. Very similar to my old technique, but this time i only extrude the rectangle, and I use the revolve tool to create a sphere at the bottom and the top to give it a better look.
Eyes and backpack:
I also used the rectangle tool to sketch out the eyes and the backback and then I extruded it and used fillet to give it rounded edges. However, its still pretty basic as of now. Soon I will work more on them if needed or I might improve the body and legs.
I also removed a chunk from the bottom to make it flat for the among us character can sit on my table.
1h 4m 3s logged
After many failed sketches and techniques I used the 1 rectangle + 2 3 point arc technique to make pill like shapes that I’m using to make the body and the legs. I also added a rectangle at the bottom to remove a part of the body to make it’s bottom flat. And for the legs I used the fillet tool at the correct proportions to make it round but also flat at the bottom.
