led matrix joinable
Hardware- 1 Devlogs
- 7 Total hours
its a addressable led matrix which can be joined by magneticly clicking into place
its a addressable led matrix which can be joined by magneticly clicking into place
A led matrix
Devlog 1:
*choosing parts
^designing the circuit
~parts wont fit on the pcb
^The circuit desing was relatively easy. I just connected the components on kicad editor. But first time using it so there are some naming issues and the whole circuit doesn’t quite fit on the A4. Footprints were from the standard library.
~ Currently designing the pcb (at least trying to). I’m having problems trying to align every single component by hand since there is a lot of them. And I wasn’t able to fit the buffer on the size I wanted the pcb to be. (I can always put it vertically thought).
Even then I want to have a common potential plane witht the 5V on the side of the LEDs but after putting all the components there doesnt look like it will have much effect. Other than the main power lines carrying 5V at 2.8A looks hard to fit ( if its even possible). So I might go for 2 seperate pcbs.