stardance has been extended another month! the new deadline is october 31 :)

You are browsing as a guest. Sign up (or log in) to start making projects!

SCAPAD

Hardware

By @SCAMMARAS

  • 2 Devlogs
  • 5 Total hours

I am building a hackpad using hackclubs guide

Source
Ship #1 Pending review

@SCAMMARAS on SCAPAD

SHIIIIPIPIPIPIPIPIPPPPPPP!!!!! Hello there I am Nikos Samaras from the buku buku team and i present you …… my hackpad !!!! This hackpad has several functions but my favourites are:
It opens discord
Google
and Youtube!!
You can really easily change what each key do from the code just by changing the text in the run app of windows , sadly it probably doesn’t work on every linux or mac device as i do not know if they have a run app and even if they do the code will need changes , anyway Stardancers that is it for this project which is btw my first shipped hardware project on stardance and the first that i was funded for in general. I love you HackClub for making it possible to get my first ever pcb and first ever macropad or should i say HACKPAD

Video of Project → See source code →
Open comments for this post

@SCAMMARAS on SCAPAD

1h 56m 7s logged

Devlog 2 | Hello or should i say goodbye 😭 stardancers. In this devlog i want to present to you…. THE GREATEST…. THE BEST MACROPAD you will ever see. OK ok , if being serious there is nothing impresive with scapad . I would want to say that everything went according to my plan , but sadly because of my inability to wait and be careful i made a fatal mistake that almost made me give up when i was assembeling the board , the error was that i soldered the microcontroller the wrong way and the buttons weren’t connect to the gnd at first i attached external wires , but it seemed too ungly , so i just attached another pcb(the same design) near it that works and connected them with small wires and now the macropad works , but … it became bigger and it doesn’t fit in the case i had prepered and my 3d printer is not working 😭. So here is just the pcb in the jlcpcb box.I will be sumbitting this project so please wish me luck!!!!

0
0
29

@panda approved your funding request ?

$0 B Tier

thanks for doing all the changes, approved !!!

@panda returned your funding request ?

$0 B Tier

hey great work on this, and thanks for doing all the changes ! i still need you to do one last thing - could u add a .step file for each individual part of the case that needs to be printed ? thanks in advance <3

@panda returned your funding request ?

$0 B Tier

Great work on SCAPAD, but i need you to make a few changes before it can come to life !

First of all, please add more images to your README ! Its great that you have a pic of your schematic, but you need some of your PCB, Case, Assembly, etc. !

In addition, you seem to be missing the Production folder ! What that is, what goes in it, and how to make it is explained here:
https://hackpad.hackclub.com/submitting

Open comments for this post

@SCAMMARAS on SCAPAD

3h 11m 2s logged

Devlog 1| Today i started with the Hackpad i have done almost every basicthing needed i made the pcb the case and the firmware. It’s my first time building a pcb that i understand entirely who it works my previous pcb projects were to much ai carried meaning i didn’t really build anything myself. I am thinking of sumbiting this project and go on making a keyboard which was my first goal , i took this detour in order to not be overwhelmed by doing a keyboard without knowing the basics , now i feel like i can make a keyboard with almost no guidence and ai assistance

0
0
72

Delete project?

Are you sure you want to permanently delete this project? This action cannot be undone.

All devlogs, followers, and associated data will be removed.

Followers

Loading…