HEXAPOD3.0
Hardware- 9 Devlogs
- 16 Total hours
@Vedaprotoshredhq
on
HEXAPOD3.0
1h 2m 10s logged
Made Rod
Okay so I made rod for the upper and lower system, firstly calculate all sizes and then will had to make the rod thin enough that it can pass through both gear and ball bearing holes and then calculated the length of upper and lower parts and then made the roof of exact length.
Now will just have to make one more small part then will move to tibia parts.
@Vedaprotoshredhq
on
HEXAPOD3.0
1h 1m 4s logged
Making rod for gap and checking things and space.
Okay, so made rod to get space between 2 layers and checked which parts CAD designing is done and how much space will it occupied.
@Vedaprotoshredhq
on
HEXAPOD3.0
3h 21m 43s logged
Finally complete assembly of HEXAPOD/SPIDER ROBOT 2.0!
okay so I was finally able to make the complete assembly of the HEXAPOD/SPIDER ROBOT 2.0, but I by mistake I clicked hexapod3.0 so it got logged in this project.
@Vedaprotoshredhq
on
HEXAPOD3.0
1h 31m logged
CORE DESIGN AND FEW OTHER PARTS AND HACK TIME PROBLEM.
Okay so, I worked for 7 hours also made the time lapse but it didn’t got counted in stardance but it does shows the timelapse videos in hacktime,
So I made the designs for the core and few other parts on freecad some parts didn’t turned up well.
@Vedaprotoshredhq
on
HEXAPOD3.0
3h 6m 50s logged
WASN’T ABLE TO MAKE IT WIDE ENOUGH.
Okay so, i tried making the structure but the exterior thing which will connect the servos to core and body was to narrow that it will end up braking if used, so will have to start from zero again.
@Vedaprotoshredhq
on
HEXAPOD3.0
1h 13m logged
FINALLY WAS ABLE TO FIGURE OUT THE CORE SYSTEM!
Okay so some how was able to figure out the core system and now will start designing rest of the things and will try that they stick together but won’t break eachother.
@Vedaprotoshredhq
on
HEXAPOD3.0
1h 4m logged
Multiple gear system!
So, there’s a gear system in the core which will make it unique, but right now it’s different to get the distance between the core and the servos because of the system , so maybe will make a replica and will try to find the distance and maybe in this one I will be using metal leg structure instead of 3d printed once , if they won’t be heavy.
@Vedaprotoshredhq
on
HEXAPOD3.0
2h 19m logged
RESEARCH ANDS A LITTLE BIT DESIGNING.
So, didn’t did much designing, like it’s not even designing, so I did more research so maybe, now will start designing, but it’s confusing and difficult to figure out things for this one.
@Vedaprotoshredhq
on
HEXAPOD3.0
1h 20m 31s logged
HEXAPOD3.0 STARTED!
So, didn’t didn’t much for now was just trying to figure out things and how and where which thing can go and and what can be used for it.
