By
@Blorbing
I want to build a 3D printable replica of a nornir chest that has leds, hinges, and a mechanism that makes the front head statue swing forwards when the chest opens.
4h 12m 42s logged
The chest has a base now! The base is so big it has to split into fourths to fit on the printer bed 😂. It is ~700 grams. I also added indents in it that will fit a breadboard, battery pack, and wires. I’m going to be using a nano on the breadboard. I could just stuff all the electronics in the chest, but then i wouldnt be able to fir anything inside, so I’m just doing this. I also think it looks awesome and I need to add some of the puzzles that unlock the chest around it, so the base is perfect. Got the base off of makerworld - https://makerworld.com/en/models/2679972-rocky-base-plateau#profileId-2967898
2h 47m 52s logged
made a boulder for the rune puzzles that unlock the chest.
1h 31m logged
Added a new gold engraving.
1h 47m 31s logged
It locks now! Will be using mg90 servos that turn 90 degrees, making the lid unable to open.
2h 59m 34s logged
Added runes! Looks great. Going to be using WS2812B Led rings, and I’m going to 3d print a cover thing for it that will disperse the lighting as it only has 7 leds per ring.
1h 10m 1s logged
Added hinges and a gold engraving on the top of the lid. Looks great, moving on to head and leds for runes.
1h 13m logged
Finally progress. I’m not adding scales onto the dragon, but it actually still looks good.
4h 23m 16s logged
I spent 4 literal hours trying to put scales on the dragon curve. I give up, it will be ugly in blender.
1h 49m 1s logged
Spent forever making dragon curve thing.
1h 7m 1s logged
Adding side dragons p1
18m logged
Added Rune holes to the chest base.
29m 42s logged
Cleaned up vertice mess. and started adding some stuff.
38m 1s logged
Started building my 3d printable Nornir Chest from God OF War. Just basic details right now.
.webp)
