The Zenith V is a re-useable, fully 3D printable 2 stage model rocket. powered by two 24mm booster engines in the 1st stage, and one 24mm sustainer engine in the second. The main goal of this mission is to launch and safely return a LEGO minifigure astronaut.
i did a lot and kind of forgot to devlog, so i finalized connection rings, made the nosecone design, and begun to work on the PCB for the flight computer
the first parts of the rocket have been finalized, printed, and assembled. The structure of the main body is now ready for testing.
Parachute bay and main body tube almost complete, this is an image of a 3D model for the parachute bay and main body tube, all that needs to be done on these is adding strength via interior support bars.
The final version of the Zenith V booster stage is complete. This is the version that will launch the rocket about 2000 ft before the sustainer stage activates and this stage falls back to the ground.
now printing the final version of the main booster stage for the Zenith V
Zenith V booster stage test model –––––––––––––––––––––––––––––––This is a test model for the booster stage of my zenith V model rocket, the booster stage will house 2 Estes E 12 0 motors.
