You are browsing as a guest. Sign up (or log in) to start making projects!

My Musicpad!

Hardware

By @Omelette

  • 1 Devlogs
  • 4 Total hours

A hackpad that makes it easy to listen to music with. The Kicanvas link is a tad bit broken so uhm uhh dont mind it u have all the files + screenshots.

Source
Ship #1 Pending review

@Omelette on My Musicpad!

I made a quick hackpad for funzies and because i got burnt out from another project. This is for listening to music, and I also just wanted an excuse to build a hackpad. I learnt how to use cad and work with the kmk library and programmed with circuitpython. I havent built it yet so im hoping to build it IF THE FORM STARTS WORKING /hj. Anyway this was really fun.

Video of Project → See source code →
Open comments for this post

@Omelette on My Musicpad!

3h 39m 2s logged

So well I essentially did everything in this one sitting. I already had done the schematics before 6 motnhs ago, so i just had to redo and refine the schematics and design. This still took a while, but atleast it is polished and good. The cad was next, I used the dimensions from the circuit and followed the guide, and managed to make the bottom pretty quickly. I also then did the top, which required a bit of math to see where to put the switch and knob holes. I then added in the screw holes and exported it. I then started working on the firmware, which i used kmk for. I first of all imported the library and got a script working, then i used some moduels to get the media stuff and rotary encoder working. Overall solid 0.5/10 process would do again(was actually really fun to build).

0
0
1

Followers

Loading…