@RishuKamboj

What have i been upto?
I finished with the V1 3 days ago although i didnt record it, it was very bulky because of the expansion board and 18650 batteries so i set onto making the v2 much smaller and less bulky which meant removing the expansion board and using a much smaller battery. also in V1 i used the buck converter for 7v to 5v but this time in v2 i used a single 3.7v lipo battery and boosted it to 5v to save space. the code data is still very inaccurate ill be working on it soon. I also posted a lapse of me redesigning the v2 case because i forgot to add a hole to easily update the code without taking the whole thing apart everytime.

So i finished wiring the whole project (you can see a snapshot on the project cover),i also designed a cute cover for it.

Final Product!

Here are my Printer Settings: -
(0.4 mm nozzle)
-Layer Height: 0.12mm Fine
-Build Plate: Textured PEI Plate (you can use any)
-Wall Generator: Arachne
-Order of walls: Outer/Inner
-Ironing: Topmost Surfaces only
-Only one wall on top surfaces: Enabled
-Outer Wall Speed: 50 mm/s
-Top Surface Speed: 50 mm/s
-No Brim

Today i started working on the V1 of my sports for blind people project, with some help from claude for figuring out how to turn the data from the sensors to useful information which will be shown at a local website for now (will write an android app and ios app for it later).

V1 is supposed to be the testing phase in which ill focus on perfecting the data and accuracy ignoring the bulkiness of the project for now.

I had like 30 errors in pcb, fixed em all now.

Started building the slack bot, ran into ‘no variables found’ for like 10 times before i realised i named .env file tokens.env :’)

Finished with Modelling the designs , will post Printed Version soon.

Made the Schematic (different from what i showed in lapse)

for anyone wondering this is my very first project and yes i literally forgot to turn on timelapse :’)

Just finished with coding!