I started to solder all the components which I assembled in last devlog.
That’s All
So to start, I went with the tutorial project to learn some features about HTML and how to build a web page. I learned the basics of HTML and Tailwind. After that I connected my github but for some reasons I faced difficulty selecting the right repository, perhaps I am a beginner. I spent a lot of time to find out how to connect hackatime, github, VSC and how to use all of them. I proceeded with updating my github and finding the bug and after some research and updates I completed my setup of VSC, Github desktop, Github web, hackatime and all other procedure. perhaps I am ready to proceed to customize my website at my will. I went to VSC and started making My Website, I used open source to learn a lot about HTML and still learning.
I finalising with[I suppose] a retro theme. I learned about how to approach HTML and use Tailwind css for styling. During editing my code I faced a problem, With no cause to some extent my preview was not always worked. perhaps it was just an preview extension error but after some research it was fixed too. I also updated some details in the README amd organised it as best as I can. And the main work was of course in the website It took a while to figure out each tag’s function, how to use a tag where to use a tag, different tags alternatives, and what not to use. My website maybe absolutely simple but what I learned and experienced was always above. After the editing was done of both website & README I saved the file. Then I used my GITHUB Desktop to push the updates to my GITHUB page and then at the end I used Github for the deployment of my site. Enough said
I add the other components which were not added in the previous devlog. I was confused between two resistors about their resistance so I just calculated it. I had a little trouble getting the components in the right place but I figured it out. So, this is how it looks till now. I think will work on the programming the microcontroller or maybe soldering the components in the next devlog.
In the devlog, I got all the components required and started the assembling process. Unfortunately I had to check all the leds before using them and turned out some of them were fused. I still have to solder everything and also code the esp32.
Final updates and changes to schematics of my project 2d matrix display. I tried making it more neater and organized than before. I removed all the excess text and other interferences. I think it is done. But I do think I have to make some changes after I make it physically [Maybe].
This Project is a continue work imported from macondo and will continue in stardance
