@taran

We finally finished assembling and coding GlintX!

We spent a lot of time putting together all the electronics and getting the motors, pump, and cleaning mechanism to work together properly. There was a lot of wiring and debugging involved, especially getting everything to fit inside the enclosure while still keeping all the connections accessible. The code also took some testing to get our carriage synced up and work properly. Our 3D printed carriage broke twice thed ay before open sauce and then we decided to have asplit design with each roller having their own carriage and that fixed it!

After getting everything working, we brought GlintX to Open Sauce and got to demo it to 100+ people! It was really cool seeing people watching their phones get clean, providing their own feedback and appreciating our project! i am extremely grateful for hack club providing me with this awesome opportunity :)

We finally finished making the 3D model of our project!

We spent a long time on the carriage design (the square piece in the attached vid that holds the two microfiber rollers) and getting the gap between rollers right to fit phones of all sizes, including cases. We went for a sleek futuristic look, so it had to be compact and not too big. In the end, while designing the cleaning fluid container, we realized in the end that we have only one water pump and one long pipe but 4 nozzles lol. So we have to cut them and find a way to arrange and connect them separately.

The hardest part was the middle base — it supports the carriage, phone, and threaded rods simultaneously, and getting exact measurements was annoying since several Amazon listings don’t list dimensions. We also designed two internal pillars for structural integrity that double as mounts for the UV strips.

The build splits into 6 parts: top lid, carriage, middle base, 2 parts for the shell, and bottom base for all the wiring and Arduino. This was because we wanted to 3D print this project easily without much supports.

I also added all our files and created a README to our Github repo and also created a demo video. Our project is now ready to submit for the outpost funding!

Thanks for reading! (sorry about making this a bit too long, I should’ve made this into multiple devposts)

Hey everyone! I finalized the parts list after almost 3 hours of research.

Figuring out the motor setup was pretty challenging. I first looked at the NEMA 17, but that was too overkill, then went through 4+ different DC motors before picking TT motors, which have low RPM but high torque (required for spinning our threaded rods) unlike the other motors we looked at.

Also had to ditch our first power adapter when we realized 1300mA wouldn’t handle 4 motors running simultaneously. Swapped it for a proper 12V 2A supply.

Next, we have to create the CAD model for our project and submit the design!

Hello everyone! I tried to come up with an original and useful idea for a hardware project for Outpost and decided to make a phone cleaner!

@Ben_A and I designed some of the mechanical design for the project in a whiteboard today. The cleaner uses two threaded rods to drive a microfiber roller up and down both sides of the phone, with UV lights lining the inner walls and a sliding door on top to add cleaning fluid. The phone sits vertically in the center.

Hardest part of the design was figuring out the microfiber roller design. We ended up choosing threaded rods in order to make the roller move up and down along the phone’s screen and back.

Next, we have to complete a proper diagram of our project, make the CAD models to 3D print, and finalize the parts list. We’re trying to find as many parts as possible in local stores nearby to avoid shipping delays!

Tested the word extraction feature for my basic vocabulary builder project for CS50P
by pasting a complex paragraph and seeing which uncommon/difficult words it outputs. I spent quite a while figuring out how to filter out all the punctuation (finally used regex properly!) and simple words.

Working well so far! (except for the fact that it does sometimes pull simpler words that slip through the filter like “donut” and “bakery” here lol – gonna add a “I know this” word feature later on, similar to membean)

I’ve been working on this for about 2 weeks (before Stardance) after procrastinating on it for a long time and have actually built a bit more than this with a quiz feature but that’s how the beginning went. (The 23 min logged was actually spent working on the pytest file – posting about that later on!)