Hey everyone! I finalized the parts list after almost 3 hours of research.

Figuring out the motor setup was pretty challenging. I first looked at the NEMA 17, but that was too overkill, then went through 4+ different DC motors before picking TT motors, which have low RPM but high torque (required for spinning our threaded rods) unlike the other motors we looked at.

Also had to ditch our first power adapter when we realized 1300mA wouldn’t handle 4 motors running simultaneously. Swapped it for a proper 12V 2A supply.

Next, we have to create the CAD model for our project and submit the design!