Finally finished the drone frame and im pretty happy about it. now 25g and (hopefully) withstand about 8kg of force without permanently bending. Next is the housing unit for the pico, MPU-6050 and 4 in 1 ESC
Finally components have arrived and now redoing the whole design to fit all the components as i over estimated. The designs are based on the motor placement, the propreller diameter, the raspberry pico and a gryoscopic sensor. This is will be finished in the next few days and hopefully i will get the frame printed by next week.
(the reason why its a quarter done cuz i can mirror it so i just do one arm and then copy)
Finally finshed the truss structure for the middle part of the drone. after running it through a simulation, it can withstand around 8.5kg of force with its weight being estimated to be around 88g (we are going to 3D print the frame out of ABS plastic). Now its just buying the parts and making adjustments to fit onto the frame
Third drone frame design(this project started before i discovered stardance), i made 2 versions of the truss(left and right) which i will run a simulation to see which can withstand the most stress.
