Basically a group project with my friends where we make it out of scratch. The frame will be 3D printed,the electronics will be self soldered and coded and componets will be bought. We also plan to use a raspberry pico as a flight controller along with our own app to control the drone
Finally components have arrived and now redoing the whole design to fit all the components as i over estimated. The designs are based on the motor placement, the propreller diameter, the raspberry pico and a gryoscopic sensor. This is will be finished in the next few days and hopefully i will get the frame printed by next week.
(the reason why its a quarter done cuz i can mirror it so i just do one arm and then copy)
Finally finshed the truss structure for the middle part of the drone. after running it through a simulation, it can withstand around 8.5kg of force with its weight being estimated to be around 88g (we are going to 3D print the frame out of ABS plastic). Now its just buying the parts and making adjustments to fit onto the frame
Third drone frame design(this project started before i discovered stardance), i made 2 versions of the truss(left and right) which i will run a simulation to see which can withstand the most stress.
