@Jxsh on Pi Zero 2 W Enclosure
PrintGuard Raspberry Pi Zero 2 W Protective Enclosure Start Time: 01/05/2026 End Time: 04/05/2026 Total Hours: 5.3 hrs
Session 1 Date: 01/05/2026 Time: 2pm - 3pm Duration: 1 hr Work Type: Research Tasks:
Researched the Raspberry Pi Zero 2 W specifications Got measurements for the PCB (65mm × 30mm) Noted port positions for Mini HDMI, Micro USB OTG, Micro USB power and microSD slot
Session 2 Date: 02/05/2026 Time: 10am - 11:30am Duration: 1.5 hrs Work Type: Modelling Tasks:
Set up new Onshape project for PrintGuard Created base sketch using Pi Zero 2 W measurements Modelled enclosure base with 4× M2.5 standoff columns and port cutouts Exported base as STL (printGuard.stl)
Session 3 Date: 03/05/2026 Time: 2pm - 3:30pm Duration: 1.5 hrs Work Type: Modelling / Testing Tasks:
Designed snap fit lid in Onshape with passive cooling fins Added optional OLED window and a protective lid
Images:
Screenshot 2026-05-25 at 13 10 30
⚠️ Issues / Challenges
microSD cutout was 0.5mm too narrow on first print — fixed by updating it github link wasnt working (fixed)
- 1 devlog
- 0h build
