@WilliDih123
on
Boltgun nerf gun
57m 2s logged
I made both sides more symetrical and added a better barrel with a holder.
@WilliDih123
on
Boltgun nerf gun
2h 0m 1s logged
Here I added some small components hen changed appearances and did a render so that I could visualise how i’m going to paint it.
42m 1s logged
I added all of the components to the battlebot to ensure that everything fits, I then sliced it so find out a rough weight.
@WilliDih123
on
Helldivers macropad!
44m logged
Making notes from videos
@WilliDih123
on
Helldivers macropad!
17m logged
I added a small cuff around the side of the lid to ensure a tighter fit.
59m logged
Here I added a lid with screws, a spinner blade and a lid for the N10 motor housing, I am almost finished with my battle bot, now all i need to do is add some front plates.
1h 5m 1s logged
I added a main body, I made a 1806 sized drone motor and a housing for it. Next I’m going to make a spinning weapon for the drone motor.
35m logged
Making a motor housing with an accurate N10 motor that I designed.
@WilliDih123
on
Helldivers macropad!
3h 18m 18s logged
I made a prototype board with a petentiometer and four buttons with a pico w with a rp 2040. I wanted to use it to see if I could even pull off the idea, I also made a case.
@WilliDih123
on
Helldivers macropad!
22m logged
Here I added a page for notes with links to what I am buying.
@WilliDih123
on
Helldivers macropad!
1h 15m 53s logged
Here I 100% redid my whole pcb design because some people said it was messy, also I made some gerber files for it and uploaded it to JLCPCB to get a quote.
@WilliDih123
on
Fan to Cooling Pad
1h 4m 27s logged
Adding cases for both the motor and a gear shaft
@WilliDih123
on
Boltgun nerf gun
1h 5m 1s logged
Adding supports for the firing mechanism.
@WilliDih123
on
Boltgun nerf gun
17m logged
I found out that half length darts go slower and have less inertia compared to full length ones.
@WilliDih123
on
Boltgun nerf gun
40m 1s logged
Making covers for the electronics in the bottom.
36m 5s logged
Here I added 2 N10 motors to my malenki nano
@WilliDih123
on
Fan to Cooling Pad
2h 28m 50s logged
Here I made a space for the laptop to sit on, 2 gears to change the angles and an extender for the motor, I am a bit worried about getting the perfect angle though.
@WilliDih123
on
Fan to Cooling Pad
1h 10m logged
I added a dust cover and a new, larger, upgraded fan but my laptop lagged out and the dust cover got deleted.
@WilliDih123
on
Fan to Cooling Pad
1h 14m logged
Making a fan and a motor from measurements I made.
@WilliDih123
on
Fan to Cooling Pad
1h 0m logged
Here I disassembled the fan to get it into parts to get measurements that I can design around.
Loading more…