@Minecraftchest2

I managed to get the item i was working on last time working along with getting an armor set and data gen working. right now the item i’ve added is just leather that i have made 60 time darker using the shading tool in pixeloroma. the armor currently doent have a texture sense i haven’t figured out how to make an armor set quite yet. the entity i was working on last time is on hold for the time being though i am planning on having it drop the new item (hollowed husk) so it will be added by the end even if it just uses an exsisting entity model.

Started work on creating a custom entity and custom item. It has been fun to work on making a custom entity sense the example code from the fabric docs for the rendering just gives errors for everything (i have tried seeing if there was missing imports but there are none). also i dont think that the page for custom items on the docs is accurate so now i am going to watch kaupenjoe’s video on custom items,

Soldered all the parts i have. The only parts that i need to solder are my devboard which i am still waiting to be delivered and the buzzer because i forgot to make sure that the footprint was the right size for the buzzer i ordered so now i either need to find and adapter or find a buzzer that fits the footprint i have. once i find my wire cutter i am also going to trim the pins on the battery holder.

switched to using a screw terminal so that way i don’t have to worry about the terminal not being able to handle more current then a conn header or the jst-sm connector. now that i think i have the pcb ready to be made i just need to optomize the bom more if i can.

moved to a mic module instead of trying to figure out how to connect a smd mic. i needed to move around the layout of the board to make it work but it wasn’t to bad. i decided to go with a Adafruit I2S MEMS Microphone Breakout - ICS-43434 and i’m just going with a conn header instead of finding a footprint for it.

got the parts and foot prints for the board set up. i had spent a bit trying to find what parts i wanted to use. now all i need to do to make it truly my own is add silk screen art.

added a i2s mic for wled reactive audio. i also switched to the eps32-S3 sense the C5 is still in beta or alpha support and was recommended to not use it. i hope that i got the mic wired up correctly sense the example i was baising it off of had diffrent pin names. i also find it kind of fun how every mic that i looked at for this projhect was obsolete so i just need to hope that they dont go out of stock before i order. though there is 9000+ of the mic i’m going with so it shouldn’t really be an issue.

Worked on getting the schematic set up. this part isn’t really going to have to much of what could be concidered original sense i am following a wireing diagram from wled to get the connection from the esp32 to the led strip set up correctly.

worked on figuring out how to connect my radio IC to my pico. wasn’t very successful but found that i can do a embedded antenna so i can do a pcb trace instead of needing to use headphones for the antenna.

Started working on the slack bot. right now it just has the functions from the guide but i am looking at adding more.