JP Pad
Hardware- 2 Devlogs
- 2 Total hours
A macropad for some CAD shortcuts or computer shortcuts.
Devlog - 2
I have created the base design for my JP Pad. This is the simple design that I had in my mind. I basically measured my PCB design and used those measurements to make this. I have a cutout for the switches, a screen and lastly a rotatory encoder. I will be adding more to the design like a linear pattern which should take me that long to make it. I think I was quick in doing this because I have made this simple designs for my engineering classes and like have done it in general, so I was quick with making this. Let me know what you think of this design. Thank you
Devlog - 1
Ok so I have started on this hardware project which is JP Pad. Why I chose that name? Because JP are my initials and this is a macropad so pad comes from there. I have designed the schematic for the pcb and have routed the pcb. This was my first time making it but it was fairly quick. I am attaching the images of it down below. Let me know what you think about it.
NOTE: IT TOOK ME 39 MINUTES TO MAKE IT BUT THERE IS A SYNC ISSUE WITH LOOKOUT AND HACKATIME FOR ME. I AM REQUESTING THE REVIEWER TO DEFLATE 46 MINUTES OF MY TIME TO ACCOUNT FOR THAT INCREASE DUE TO A SYNC PROBLEM.
