Devlog 1: Schematic & PCB Layout for the Cyberpunk Alarm Clock! 🛠️⏰, Today I officially kicked off my BLARE alarm clock mission for StarDance! I decided on a Cyberpunk-inspired aesthetic: an alarm clock featuring a Seeed Studio XIAO ESP32-C3, 4 mechanical keyboard switches for tactile controls (Hour, Minute, Snooze, Mode), a piezo buzzer for custom chiptune alarm melodies, and an 8-pin header for the 2.25” TFT screen.
What I completed in this session:
- KiCad Setup & Library Config: Set up KiCad 10 and configured the Seeed Studio XIAO ESP32-C3 symbol and footprint libraries.
- Schematic Design: Placed and wired all components in the schematic editor. Used clean net labels for all signals (
SW_HOUR,SW_MIN,SW_SNOOZE,SW_MODE,BUZZER,TFT_SCL,TFT_SDA,TFT_DC,TFT_CS). Mapped RST to 3.3V and BL to GND as recommended in the BLARE guide to save GPIOs. Ran ERC with 0 critical errors! - PCB Layout & Outline: Transferred components to the PCB editor and drew a clean 95mm x 55mm board outline on the
Edge.Cutslayer (well under JLCPCB’s 100mm limit). - Component Placement: Aligned the 4 MX mechanical switches in a row with standard 19.05mm spacing for keycap clearance. Placed 4 M3 mounting holes in the corners for the 3D case, and flipped the ESP32-C3 and piezo buzzer to the back layer (
B.Cu) so they will be neatly hidden inside the enclosure. - 3D Inspection: Checked out the board in KiCad’s 3D viewer, and it looks super clean!
Next up: Routing all copper traces on F.Cu/B.Cu, pouring the ground plane, and starting the 3D case design in CAD!
Comments 1
please share your opinions
Sign in to join the conversation.