SmolPad is an open-source, custom 3x3 mechanical macropad powered by the Seeed Studio XIAO RP2040 microcontroller. It features a 3x3 diode key matrix, an EC11 rotary encoder for volume control, and a 0.91" I2C OLED display for a plain text output (for now) , all in a custom 3D-printed case running KMK Firmware .
1h 7m 1s logged
Changed footprints as they were diffrent from the ones used in hacpad kit
Waiting on a reviewer. We'll let you know as soon as there's a decision.
4h 21m 37s logged
Yeah i forgot to record half of the case , the firmware and the readme and BOM . Lost lot of time but i used Visual Studio code for the firmware and reame , bom so i didnt lose that time but now the project is complete and is looking good and now i will ship it
3h 18m 1s logged
The case is almost complete just the backside is left and i am thingking of a adding a hackclub logo
1h 35m 1s logged
Completed Routing
2h 52m 41s logged
Currently routing copper traces
1h 16m 1s logged
https://www.youtube.com/watch?v=8WXpGTIbxlQ using his guide to make it
1h 34m 1s logged
Finnally started on my own hackpad . using https://wiki.ai03.com/books/pcb-design/page/pcb-guide-part-3---creating-the-mcu-schematic guide
1h 36m 53s logged
Creating my case
1h 2m logged
Almost completed Designing your pcb part but there is a error i am currently fixing . am using ai to help me
