simple-alarm (blare) Devlog #2

What I did

I finished the 3d model for the alarm and updated the pcb a bit (mainly to fix the errors).

Problems I dealt with

When I was initially putting together the 3d model (I had zero experience with 3d models and cad) the pcb was not importing due to some errors. I asked ai what was happening and it told me to check for erros in kicad. I did that an it worked!.

I also had many issues with using cad but I was able to learn them along the way with google and ai (you can see it in my lapse, they are all public)

Also I had an issue with the model, when I uploaded the .step model to a random model viewer, it said It had issues with the model. If anyone reading this familliar with this please let me know if this is something to worry about when sending it:
Some edges are shared by more than two facets, which leaves a slicer no single inside to fill.

What’s next?

I would assume programing is next. I hope this is more of a breeze as I have more of a programming background than a 3d modeler or a pcb designer (or whatever you call that). I have never programmed with arduino language but I learned that it is very similar to C and C++ so it should probably be fine.