You are browsing as a guest. Sign up (or log in) to start making projects!

Hardware of CropSentry

Hardware
  • 5 Devlogs
  • 25 Total hours

My partner and I are building a system that detects a plant’s health and moisture levels and sends the data to a user’s app to have interactive actions they can do wirelessly through the module. This is the hardware side of the project.

For more information, you can view the slideshow here: https://canva.link/d27ymvb94v1qui6

$120 A Tier

Hi there! I think this project is awesome and I can tell a lot of effort was put into it.

I'm approving this so you can get a reimbursement, but I just want to add that many of the parts can be sources for SIGNIFICANTLY cheaper and in the future each module should only cost ~$30?

Open comments for this post

5h 6m 17s logged

So much CAD!

Today I focused on assembling all the part designs I’ve done for the project and finally got a working model. So far, I made sure to implement one thread, 7 rail designs, and 6 push in snap designs.

0
1
39
Open comments for this post

13h 21m 58s logged

Today was great! I got so much work done. So far, the Repo is mostly complete (still needs more work done), the README is done, the coding is done, the server configuration is done, some CAD is done, the photos are done, and I was able to organize everything. Can’t wait to see what’s going to happen next!

0
0
66
$120 A Tier

really nice work on this project! right now your readme is comig across as being very AI generated. since a human is reading it, a human should write it! please rewrite and resubmit, along with some additional images in your readme.

Open comments for this post

1h 12m 2s logged

Finished the schematic and made the design electrically sound. However, my partner and I ultimately decided that due to time constraints, case fitting, and sensor exposure, we are going to hand wire the design and mount each sensor individually to the encasement (of which will be 3D modeled and printed from Fusion 360). The schematic is mostly going to be a wiring diagram of where to wire pins together when we get to that point. Looking past Stardance, we do plan to make a PCB in the future.

In addition to this, I made sure to buy all the parts necessary to start wiring and CAD modeling. I also created a final and working BOM for the project.

0
1
22
Open comments for this post

2h 27m 50s logged

This week, I made a presentation that my partner and I will give to Middle Georgia State University about our project and how it can be impactful in the real world. I also created a baseline wiring schematic (We plan to use a perfboard/breadboard rather than a PCB due to time constraints) so that when the parts come in, we are able to wire everything together. I also started a BOM that will be finalized soon.

0
1
97

Delete project?

Are you sure you want to permanently delete this project? This action cannot be undone.

All devlogs, followers, and associated data will be removed.

Followers

Loading…