ErgoKey
Hardware- 8 Devlogs
- 10 Total hours
A ergonomic keyboard
I did some more routing and now its down to 78.
I started the CAD to take a break from routing for some time.
Did half routing, did more research, added battery board and hole
I changed it to the raspberry pi pico W, so I will now use QMK. It changed all the traces so I just deleted all the traces.
I did some more routing (around 30-40)
I added the art and the LEDs along with new Macro Buttons and extended the case
Finished schematic and mapped all 3d models, then started on the routing (200+ unrouted 😥)
I made some of the schematic! I decided on the parts I will use (Raspberry Pi Pico, MX Cherry, Linear Slides, and Rotary Encoder)
