Wake Up!
Hardware
By
@LeonOMO
- 4 Devlogs
- 5 Total hours
A Clock based on the mission "Blare"
Devlog #3 Wake Up! The code for Project Blare is finally wrapped! Since Ive never built a project quite like this before i was definitely out of my depth at first. I ended up using ai as a coding assistant to guide me and help write the firmware (ai just did everything). Uploaded the code to GitHubso its basically done software wise. I might change the case a bit down the line but this will propably be the final software post for this project.
Devlog #2 Wake Up!. Made the last touches on the case and started the Github, the design changes turned out to be worse than expected. Last things to do will be to improve my code and eventuallyadd it to the github.
Devlog #2 Blare. Today i finished the case for the clock. It did take me some time since i taught someone Onshape while making it. I find my design is really empty though so i might change it later on.
Devlog #1 Blare. Finished the PCB its my first time adding text to the PCB and still figuring out how to inport images. With the circuit design done the next phase is designing a 3D enclosure in Onshape
