uncomMonACROPAD

finally finished the case, shipping

i finished the pbc and the diagram, the cut on the pbc is for the encoder and a button, both mounted on the side, those can connect on jp

pbc is taking too long, but this is what icomed up with, the encoder shoiuld sit on left sideconnected to jp99a1/b1 (edited footprint to have the gnd pad on center) if that dont work well, plan b is noprmal placing on top of line 1, the other jp are for other button

so basically i comed up whit this idea, thoise side button, the pad in photo is one that i made earlier, it was with a pico(raspberry pi pico, circuitpy, adafruit-hid lib, and each button a pin, not maix, and everytingg was soldered whit a mess of wire) wile i was developing the pcb i comed up with this idea, the matrix of button is 4 button on 3 line but there is actually an 4th row. On the 4th row the first button is the sw on the rotary encoder, the other 3 are jp(those pin that are also on the microcontroller) but instead of there is the red button in photo on the first and the other 2 mayby illl add something, if some one can help me wiring the rotatryencoder orizzontally pls write me on comment or on slack

‘’‘Probably went to far my first pbc ever’’’ but i will not quit, more twist and updates soon