split-key

no more errors yippie!!! drc and erc is cleared, after some changings. now i will proceed to figure out the case and spacing for my cyberdeck! i think i will add a usb hub and a lil screen for the final product :3

i tidied the wiring up! i initially wired it but it was rlly messy, so i switched to a matrix that matches the keyboard, so the wiring is all really tidy now

i finished the wiring! i decided to change from a xiao rp2040 as it didnt have enough pins for the lower part. i also finished the matrix!

i finished the layout for the keyboard! woohoo… i had to re-place everything cuz i changed keycaps to the kailh choc low profiles :3 i also started wiring the top bit for the xiao rp2040

I started the layout! initially i was going to make a split keyboard horizontally, but will instead separate the functions key. this needs to fit in my cyberdeck, so i kept it under 32cm as its 35 in total! i made the layout with a tool from my model, put it in kicad and then replaced the keys w mine as kicad sucks for positioning tools