SteamSense-ESP32-Bathroom-Climate-Monitor
Hardware- 2 Devlogs
- 3 Total hours
A custom PCB-based ESP32 bathroom sensor that measures temperature and humidity and displays the readings over Wi-Fi inside a self-designed 3D-printed enclosure.
I’ve completed the DigiKey tutorial and searched for the Receptacle USB-C Connector. I’ll use the DX07B024ZJ1C1088. Now, I’ll create the custom ESP32 board ;)
.jpg)
Started learning KiCad with DigiKey. The annoying part was Hackatime/WakaTime. The timer kept tracking the wrong project and KiCad was not sending progress correctly, even though it was listed as a monitored app. After about an hour of debugging, I found an old .wakatime-project file causing the wrong name and set up a manual KiCad heartbeat command for the correct StarDance project. Not much visible hardware progress today, but the tracking problem is finally understood and mostly fixed :))))
