ESP32 plane
Hardware
- 2 Devlogs
- 1 Total hours
a RC(kinda) airplane that uses a BLDC motor with 2 ESP32's one as a flight controller and the other one as the receiver
15m 38s logged
Today, I made a fusion assembly of the 3 parts needed for a wing structure for my aircraft. I also sent out Emails to 2 local colleges (Saint Louis University and Washington University) If they would 3D print these parts for me because i do not have a 3D printer. I also attempted for a 72nd time to get my BLDC motor to work with my ESC and Arduino Uno. I also ran a couple more servo tests with my ESP32 that will be inside of the Airframe. When I am able to get the BLDC Motor working, I will connect it to the ESP32 and integrate it into my Servo testing code so that I can run everything with the ESP32. Below is the code that is uploaded to my Arduino to run the motor. I have the ESC speed pin connected to Pin 9, and I have the ground and 5V pins plugged into the Arduino with the Lipo battery connected to the ESC. It has not worked and if you have any advice please help me! Thank you
18m 2s logged
Here is a image of the Airframe with the addition of another servo to control Yaw. Please ignore the mess on my desk lol!!
