Valorant Prime Vandal
Hardware
By
@colgation
- 7 Devlogs
- 6 Total hours
A Prime Vandal 3dprint to be put around a nerf retaliator
@colgation
on
Valorant Prime Vandal
1h 5m 2s logged
Today I painted the gold trims on my Prime Vandal. Once it dries, the rough model should be complete, after I add smoothing and finishing touches with an acrylic pen.
@colgation
on
Valorant Prime Vandal
1h 18m logged
Spray painted the parts using gloss spray paint. Took me some time to set up, and will let dry. My Valorant Prime Vandal will be ready soon!
@colgation
on
Valorant Prime Vandal
37m 49s logged
#4: Created the top of the prime vandal build.
This one was a bit easier to make as all I needed to do was fill the bottom. Anyways, print underway!
@colgation
on
Valorant Prime Vandal
18m logged
#3: Prime Vandal resemblance
Finally managed to create both the muzzle and stock. I just made the priming bolt and its underway. I’m planning to paint it later on, as well as glue panels to the main body.
@colgation
on
Valorant Prime Vandal
1h 37m logged
Created the barrel! All that is left is making the shell to cover the main body. It took a long time to make it, since I had to remake the barrel to match nerf bullet sizes.
@colgation
on
Valorant Prime Vandal
18m logged
#2
Disassembled the nerf gun to fix internals and make it ready.
Problem: I just finished 3dprinting and realised that the inside was filled in a lightning pattern (very weak).
@colgation
on
Valorant Prime Vandal
51m 19s logged
Making a Prime Vandal Shell for Nerf retaliator!
#1:
Made the stock and sent it to print! As a side note, I am planning to share the .blend files as well so anyone can make it at home. the end product should fire nerf darts, have a swappable magazine and more!
Follow this project to support me and keep up?
