By
@Jovi
A mini weather station with tenstar esp32-s3 as the main MCU, with a 1000mAh battery. Also has a touch sensor for turning off when not used, or for controls. Has a flashlight too!(the built-in RGB LED acts as one)
I made a Mini Weather Station, with many capabilities(Used all the functions that the board has, except the accelerometer and gyroscope). Was pretty challenging to make the code, even though used AI for it
1h 26m 22s logged
Assembled the thing, debugged stuff, added a flashlight mode, and added a way to exit AP mode from the device itself.
You can watch the video showcase of the station here:
https://github.com/user-attachments/assets/98cfebd6-e004-4a77-a924-2f23e415244a
26m 27s logged
Made the 3d model of the case for the thing(for some reason lapse didnt see my hackatime project and deducted frickin 20 minutes wth)
1h 17m 19s logged
Finally, after going through this stuff with Gemini, I finally got the final code working, and ready for commercial use! P.S. the settings are in the highlighted zone, pls don’t change other settings(only if you don’t know what you’re doing)
39m 57s logged
Soldered the touch sensor’s pins to the board, also soldered on a connector cable to the battery
