FPV Drone Stack
Hardware- 14 Devlogs
- 30 Total hours
A FPV Drone stack for 5" or drones with 30.5x30.5mm
Hi hi!
Great work! :D
Hiya, your project is looking awesome already! Before I can approve this, please put the price of your project into your BOM.csv, instead of LCSC part numbers. Your README could also use a little more explanation about your project and its details (for example: what's ESC/FC/ESC-distribution?), luckily we have an awesome guide on both your BOM and README at https://stardance.hackclub.com/resources/shipping-hardware, which you should follow :D
Thanks!
“Finishing” this project
Finished the ESC and the shematics of the “Middleboard”
The 4 in 1 ESC was to hard, i make 4 little ESCs now
Thought about giving up on the ESC, I just don´t know how to route this thing on a 4 Layer 2 oz outer and .5 oz inner copper weight
Still far from finishing
Finished the shematic and the layout, but not the PCB size
Still trying to layout the ESC, it doesnt work ;(
Still on the shematic
Worked on the ESC shematic almost ready for layout
Fixed some routing errors on FC nad began with the ESC
Fixed some errors on the FC
Finished the FC!!
Finished the shematics and the layout and started with the routing
Im working on the main parts of the flightstack (MCU, IMU…)
