By
@aaravw2001
I am building a macropad called Zenithpad. It is a 6 key 2 rotary encoder macropad. I used KMK for the firmware. The CAD uses 2 parts, the top and the bottom. Both parts are secured using 4 heatset inserts and 4 m.3 screw bolts. I require funding to get a soldering iron, but I already have a 3d printer.
@aaravw2001
on
My awesome macropad!
4h 38m 2s logged
Finished Macropad Firmware, and Preparing to Figure out how to get parts!
@aaravw2001
on
My awesome macropad!
1h 58m 53s logged
I finished my CAD models, now time for the firmware…
@aaravw2001
on
My awesome macropad!
1h 31m logged
Finished the PCB, and have started cadding the Case!
@aaravw2001
on
My awesome macropad!
49m logged
Finished fixing schematic, and started working on updated PCB
@aaravw2001
on
My awesome macropad!
32m logged
Messed up my PCB, the power port was facing the wrong, way, so I decided to scrap and redo the entire thing!
@aaravw2001
on
My awesome macropad!
1h 24m 1s logged
Finished the PCB for my macro pad! I am still struggling with the dimensions of the objects, and may need to adjust the PCB.
@aaravw2001
on
My awesome macropad!
53m 16s logged
Just finished the pcb for my project. I am also starting work on a more complex one and am looking at files to learn how to do so.
@aaravw2001
on
My awesome macropad!
26m 20s logged
Finished my PCB schematic!!
