Onshape is genuinely starting to irritate me. I’ve been trying to fix whatever problem I don’t even know of for almost 2 hours. I’ve tried every single relation; I redid it twice. I’m literally going to just remove it as a whole.
hey there! take a read through this and it’ll show you a tool onshape has to help resolve this issue. beyond that, the 90.297 slightly to the left of the middle of the screen looks a little suspicious to me. you also have a constructin line that is supposed to be horizontal and looks slightly angled which is a little odd. https://www.onshape.com/en/resource-center/tech-tips/sketch-constraint-manager
in the future I recommend that you try to define as much of your sketch as possible without using the dimension constraint. marking things as horizontal/vertical, parallel, perpendicular, concentric, equal, etc tends to give me a better workflow. build out roughly the shape you need and then define the actual numbers it needs. ping me on slack @Raygen Rupe if you want help!
Comments 7
understandable crashout
hey there! take a read through this and it’ll show you a tool onshape has to help resolve this issue. beyond that, the 90.297 slightly to the left of the middle of the screen looks a little suspicious to me. you also have a constructin line that is supposed to be horizontal and looks slightly angled which is a little odd.
https://www.onshape.com/en/resource-center/tech-tips/sketch-constraint-manager
in the future I recommend that you try to define as much of your sketch as possible without using the dimension constraint. marking things as horizontal/vertical, parallel, perpendicular, concentric, equal, etc tends to give me a better workflow. build out roughly the shape you need and then define the actual numbers it needs. ping me on slack @Raygen Rupe if you want help!
@RR Thank you so much. I ended up removing it after redoing it two more times, but this will help me for future events. I appreciate it.
Which software?
@Vedaprotoshredhq Onshape
okay
Sign in to join the conversation.