StarPi
Hardware
By
@mallow_dev
- 2 Devlogs
- 1 Total hours
a development board of the rp2354b with some fancy celestial designs
56m 10s logged
Devlog 2: The schematic is ALMOST done!
after almost an hour and a bunch of documentation reading, im essentially done with the bare minimum schematic.
i learned what a bunch of stuff is today and its usage, like crystal oscillators and understanding flash memory better.
as far as my project goes, i need to wire the GPIO pins to the header pins, then i can add all the bells and whistles (OLED display, GPIO controlled LEDs, etc.)
31m 50s logged
StarPi power input and filtering
hello everybody, this is my first devlog for StarPi, a celestial themed raspi pico!
currently, as seen in the picture, I’ve been going off of the official RP2354B hardware guide to get a better understanding of what to do. once I’m done with the bare minimum, im going to add some extra features, like an OLED display and 3 gpio controlled LEDs.
my current goal is to hit an hour total today, with flash and the crystal oscillator fully complete.
I’m happy to call this my first hack club and stardance project!
