Project Flex
Hardware- 1 Devlogs
- 0 Total hours
Prosthetic hand controlled by servos using joysticks
Hello!
There are a few things that need to be changed:
- You need to add the firmware for the project! Your code for the prosthetic arm is missing.
- You need to make the wiring schematic yourself! As of right now, the image that you have included is created by AI, according to an AI image detector. You can take a look at the image attached to see the results. Humans are reading this, therefore, humans should be the ones who are making the schematic!
- Your lapse recordings are missing! You have included one lapse recording but nothing is in it! You need to have the lapse recording of you making all aspects of the project!
Once all these changes are made, resubmit it, and we will have another look! :D
Have a nice day! :)
Hello! I LOVE this idea! However, you need to remember to improve the readme! Talk about the different aspects. Use these resources as listed before to help: https://stardance.hackclub.com/resources/great_readme
https://stardance.hackclub.com/resources/shipping-hardware
You can use this as an example for an extraordinary README: https://github.com/qcoral/orpheuspad
Once you are done with these changes, we will take another look! :D
Just like both your previous reviews said, you need to work on the README! You can use both these resources: https://stardance.hackclub.com/resources/great_readme and https://stardance.hackclub.com/resources/shipping-hardware.
Your wiring diagram is also unreadable, please revise it and resubmit. Thanks!
Like the previous reviewers said add CAD files and a BOM.csv to repo. (CAD files need to be in .STEP format)
Hiya, this is a really cool idea! Please export your CAD files as .step from onshape so they are permanently available on Github. Also check out this guide to writing a detailed README so other people get a good introduction to your project: https://stardance.hackclub.com/resources/great_readme
Regarding electronics, you should provide a wiring diagram to show how all of your electronic components work together and a bill of materials in a BOM.csv file to show what you need to buy and why. There is a guide that can help you here as well: https://stardance.hackclub.com/resources/shipping-hardware
Hi, I don't see any design files in your repository, a BOM, README, and some more. Please check this link out and tick through each individual box! https://highway.hackclub.com/advanced/submitting
This is the base model of the finger, in the lapse I show you the 3d models and how I worked up to it.
