Today, I designed my PCB. I started with the schematic, then a the PCB itself. I ran into some trouble with aligning the switches, because they snapped to the wrong position, but after a minute of tweaking the settings, they aligned perfectly. My switches are going to have these functions: SW1 - Skip SW2 - Pause SW3 - Rewind SW4 - Volume up SW5 - Volume down SW0 - Mute/UnmuteThe switches are in a simple 2x3 layout and the ESP32 is on the back. You might be wondering, why I chose switches for volume and not a dial. Simply put, I just don’t like dials. Additionally, it just wouldn’t have fit in the layout. Next step will be designing a case.