A wind turbine
Hardware- 3 Devlogs
- 2 Total hours
A wind turbine which will generate electricity
hi! currently your CAD isn't complex enough. you'll need to go further designing a more detailed housing with everything modeled. additionally, we can't fund you an $80 lead acid battery, can you find a lower capacity alternative? also, to get approved for S tier, you need to design more yourself, like the charge controller PCB. otherwise, cool idea. good luck!
Hiya! Please include a full CAD assembly in your CAD folder in order for this to get approved. Also, try to export your miro board in a higher resolution so it is easier to read (we don't want to depend on the link to miro staying up indefinitely!). Thanks!
Hello!
You are missing all of the files that are part of the CAD, Firmware, and PCB (If you have one).
In addition, make sure that you have a README that goes over the PCB, CAD, and Firmware.
Once that is done, we will take a look into all of that and **hopefully** approve your project if everything is good!
This is a very cool idea! Please include a wiring diagram and any other information or work you can show, as only having a BOM and README makes it hard to see what you‘ve worked on. Follow this guide: https://stardance.hackclub.com/resources/shipping-hardware
Requested
hi there! you need to actually ship your project. please go over the shipping page to learn how to ship your project!
https://stardance.hackclub.com/resources/shipping-hardware
worked on the electronic design materials and wire mapping
designed the hub adpater to connect fan blades to motor shaft, also designed the tail
My design of the wind turbine’s top part attaching the motor and wooden post to each other and it is free moving so it can change direction based on wind
