Hey guys! Still working on my powder dispenser. I know that it is a little early to start my CAD design, but I didn’t wanna do any more coding.

Here’s what I got done:

Started working on the CAD file for the box the powder would be deposited in. Took a long time to try to decide whether to go with a hinge or a sliding cover.

But now, the box has a sliding function that will allow the box to open and close to dispense the powder.

The box currently is around 3 cm by 3cm by 3cm without the cover, with the cover the height is now 3.8 mm.

The box cover currently has a tolerance of around 0.2mm with the lid. Idk if that is really enough, but let me know if you guys think I should change it.

I have already attached a photo for reference.