Finished the readme and the BOM

Today i really locked in and i finished the BOM file as well as the readme of the repository, now i think that it’s no more things to do so i think to ship it.

Polished the PCB and started the Github repository

I polished the PCB by adding a diode to avoid any short circuit in the charging system, and i added mounting holes connected to ground.

Then i prepared all the files so i can put them in the repository.

Finished the PCB

I finished the PCB for the kraky-lite2, now it’s time to do the BOM list and to update the repository on Github.

Connecting the PCB and 3D renders

I continued to connect the PCB together, and i gave all the components their 3D render so i visualize it in 3D.

Connecting the PCB

Now the focus is connecting the PCB together so it can function, and only then doing the firmware.

I’ve finished the positioning of the components

with today i finished a first version od the positioning of the components in the pcb, now i have to connect all the components together.

nrf24 and ch343p built

Today i’ve built the module for the nrf 24 and the module for the ch343p, now the kraky-lite2 it’s finally beginning to have a shape.

I’ve built the CC1101 module

Today i’ve built the module for the CC1101, the Sub-GHz module, i tried building it as tight as possible so the pcb will be as small as physically possible.

finished doing the schematic and imported all in cs editor

i made the schematic for the nrf24 module

Power supply and usb-c