For the Electrical Side of RadiaX i wanted to start with the Xray head electronics , in a past protoype i used 20kv 1nf caps in series , same for 20kv 5ma diodes but this gives eg. 40kv 0.5nf effective capacitance and its just a huge bottleneck , especially with the 2 xray tubes used . So i let Claude (turned out to be more work than just doing my own research , Ai’s love to bullshit) to give me research papers sumamries of tapping a voltage mutliplier somewhere in the middle to get a lower voltage or in my case 2 tubes … it turned out to be a working idea and i mean onkly 1 tube is on at the time so all is fine .. then i need the 40kv 2.2nf caps wich aliexpress had but lcsc not in stock , so i made the footprint for them and proccedet to do some more research on how i will actually build the desing cleanly in the xray head , from past experience in building xray heads i know that the HV part needs especially well thoughts or the only thing that will happen is BZZP (arcing)