FIRST DEVLOG- A entry to my project and the changes ive done when i got into stardance

Hello everyone . This is the project ive been working on for the past 3 months.
Its the best project ive done so far! Its a prototype to an eletric motorjet, or similar to other of its type people call it EDF with an afterburner.

This is partly an EDF with an after burner , but it hase extra features, more power and similiar principles to a real turbojet engine.
It has a 70mm EDF as the main engine , then comes the “tube” or the casing which is in a shape to work as a diffuzer and slow down the air , then comes the turbulence nozzle wich sits right in the middle of the tube and it porpuse is to make the air turbulent so the flame doent flameout , then the walls are covered with thick aluminium sheets to tighten the path and therefore increase the gas velocity, in this part also sits a coiled up copper tube which transports the fuel and also absobrs some of the heat from the flames to preheat the gas and at the end is the exhaust nozzle wich is the final part to increase the exhaust velocity.
All these parts work together and make a small “jet engine” wich i put on wheels to measure the thrust because its big.

Im going to make ALOT of upgrades to this project so check out my other devlogs and also follow me to see it run and how fast it goes , also for everyone who wants to know some measurements!