Arduino buzzer "piano"

@sidd returned your project · about 2 months ago

This needs changes before we can consider it shipped. Review the Shipwright feedback, make updates, then ship again.

Feedback

hi, unfortunately we can't approve simple breadboard projects. if you CAD a case, solder it, or polish it up a bit then resubmit and we can take a look again. thanks! when you do, make sure to format your repository correctly. you can use this link as a guide https://highway.hackclub.com/advanced/submitting.

Ship #1 Changes requested

@Poppy on Arduino buzzer "piano" · 4 months ago

This is my first ever hardware/software project btw! I built a mini, arduino based “piano” which uses an active buzzer and 4 buttons on a breadboard connected to an uno r3. I was loosely inspired by a few projects on the arduino project hub, although I only had limited access to resources, so I used what I know about hardware from a bit of prior research to work it out as I was putting it together, with a LOT of trial and error. Once I assembled everything, I wrote some simple C++ (which I already know and have some experience with) in the arduino IDE, debugged it and uploaded it onto the uno. Amazingly, it worked first try!!!!!!!!

2 devlogs
1h build

Video of Project → See source code →

Open comments for this post

@Poppy on Arduino buzzer "piano" · 4 months ago

43m logged

I finished writing the code on arduino IDE, added all of the frequencies and durations to each of the buttons and uploaded it onto the uno r3 :)

Open comments for this post

@Poppy on Arduino buzzer "piano" · 4 months ago

37m logged

I put together the main breadboard which was just an active buzzer and 4 buttons, did all the wiring and connected it to my uno r3 controller !! Next I need to start working on the code for the individual buttons in relation to the buzzer..