HexBoard75
Hardware- 1 Devlogs
- 1 Total hours
75 percent keyboard with a built in rp2040, OLED, tactile switches, per-key RGB and a knob!
Assigned Footprints to Schematic and Started PCB layout. I started off by looking at the schematic (it had been a while), and saw if anything needed to be fixed. Nothing much, so I started assigning footprints. Some were easy (passive), some took some searching (switches), and some took some in depth research (crystal, taken from Kai Pereira’s devboard guide). Thanks to him btw, its so much easier designing it if there’s already a guide. You’ll notice there’s not much in the pcb, thats because i was tired from sourcing the parts (short attention span)
