CAD Touch-ups

I had previously built a chassis for this robot before in Stasis, but I had never shipped it. Today, I looked at the BOM for the assembly and saw that the metal standoffs that hold the layers together cost more than $2 per piece. I avoided this fee by modeling my own plastic standoffs that had M3 holes on both ends. I also updated the wheels to fit better with the chassis and use less filament. Unfortunately, this increased the mass moment of inertia of the wheels so stopping them and getting them to start might be a future issue? (I hope not tho plsplspls).

You have a devboard too? Whatttt

Yep! At Stasis, I also made a devboard known as the KineticBoard for this robot. This wasn’t shipped either. Since the devboard was almost complete, I decided to start looking up how to use JLCPCB and realized that I had yet another BOM to fill. Yayyyy🫠. I spent a solid hour figuring JLC out and also saw that one of my capacitor footprints needs to be updated because they don’t make 100uF capacitors in a size that’s expected of the 22pF ones (oopsie). Unfortunately, doing so resulted in another issue which is that the new capacitor is colliding with the motor driver, so fixing that is gonna be a lot of fun 🫠🫠🫠🫠. Anyway that’s a task for tomorrow.