Day-3

Gonna work on Schematics

ToDo

• Add esp32-c3, shift registers

Devlog

I started by opening the kicad and working by adding the battery – but the kicad isn’t working properly (Some technical issues)

So, I switched the work to just sketch the rough idea about the led cube

I drew simple drawing showing the connection of the led’s – Cathodes should be joint together on both horizontal and vertical..!

The anode should bent with 90 degree and must be symmetrical

After the rough sketch, i moved on to add the schematics

I also sourced product for the esp32-c3 and found one by the manufacture – seeed studio

I used chatGPT to analyse some of the sourced products for the project.

That’s all for today

What’s done

• Added Battery, esp32-c3, Shift registers header into the schematics
• Sourced esp32-c3 and shift registers from digikey india