Flying Wing Drone

CAD was pretty much finalized, ballast was created, documentation was done, and I re-coded everything to make it better. AI did help speed-up the debugging process

First try at coding something. I tried to balance both the Aelevons. I also made a schematic to show how the wiring will be done. I also used paper airplanes to prove the effect of fluids on the wings with different ailevon positions. And no, I can’t spell.

Added servo place in center piece, modified the drone to fit everything, made a rudder instead of winglets. Helped balance the drone to limit tail-heaviness. Still too tail-heavy :(.

Everything was modified to fit components, Center of gravity was moved by new components, still desperately needs adjustment

Lowk spent 4 hours on electronics before this, not relizing I could record the electronics section

3d modeled it and found that when I put it on my slicer, it weighed 60g for each side, so the 3D printed parts will be around 120g total